Screen Cleaning...

The Jester

The Jester

Well-known member
What do you lads use to clean the screens on your plotters and fishfinders :question:

When i fitted the new fishfinder a couple of weeks ago i managed to get a mark on the screen, its like a greasy palm print on the anti-glare coating. :rolleyes: cant see it when its switched on, but its visible when its off...

I dont want to use any detergent type stuff and water doesnt get it off...
 
Chris


I use the screen wipes which you get for you computer screens, i have also used single sachet lens cleaners which we use on site for cleaning the safety glasses both work very well.

Sean
 
all you need is a clean soft cloth damped with clean water and gently wipe then buff up with dry microfiber. Don't use detergent or any other chemical as they just spread the grease marks. Just plain old H2O. The same applies to laptops.
 
If you can't get it off with water then you have to be careful not to damage the anti-reflective coating with other chemicals . It is recommended that you should use eyeglass cleaning solution and a lint free cloth and gently rub until marks go.
 
Chris,
you need alcohol free optics cleaner, you can get the wipes or spray from boots, any alcohol or detergent will remove the anti glare over time.
i have both, use a microfibre cloth or glasses cloth with the spray.

before you clean it blow any dust off.

Paul
 
The wipes i got today were alchohol free Paul, seemed to work ok :), i didnt end up with blue bits on the wipe like i did with my Humminbird plotter...:o:D
 

Similar threads

M
Quiet day at the Farnes 24 July 21
Replies
3
Views
261
SPEIRSY
SPEIRSY
L_muslibar
Rays of Sunshine on the Solway 30/05/16
Replies
14
Views
3K
L_muslibar
L_muslibar
L_muslibar
Druridge Bay – 22/05/16 – The hunt for Turbot (Plus Video)
Replies
16
Views
3K
Muad_Dib
Muad_Dib
The Jester
Waste of Time...
2
Replies
24
Views
2K
The Jester
The Jester
Orange Shad
Late Report
Replies
6
Views
725
mickyT
M
Back
Top