Slosh 30

[Mackemchris]

I got this for xmas, Had 6 cast of it since then that all resulted in huge birds nests. Seems like the line is stopping in mid air every time. Ive put the brakes in (2 red ones). Any advice where im going wrong? it isnt over lined and never had this problem with my last reel. Only diffrerence is the slosh hasnt got a level wind, Am thinking it may be the way im putting line on new spool? But either way its driving me mad!!

 

[wavy davy]

You will need to thumb the line, or the side of the reel like i do when you see the line starting to nest, not too hard or you will end up with a hot thumb, or try heavier line.

 

[Karl M]

the line lay is all important, if it starts overrunning feather the spool with your thumb. the slightest touch will normaly do.

 

[wheres the fish?]

Most people take the brakes out of sloshes mate, never know why but this might be the reason i know i did as soon as i got it.

Have you adjusted the spool control etc so the spool runs but not to fast using the brakes? because if it is running to fast thats whats causing the over runs... Also line could be a contributing factor if its a high dia line or a one that i describe as springy this makes it nest all the time.

Maybe the shockleader not is catching on a ring?

There could be many reasons, but the one id put it down to is the adjustments you can make to the speed of the spool. As ive had this problem...

Dean.

 

[wheres the fish?]

You will need to thumb the line, or the side of the reel like i do when you see the line starting to nest, not too hard or you will end up with a hot thumb, or try heavier line.

Or try this << Easier solution i have to do this with 525's you can watch it flare up and all you do is touch it lightly and it will fall back into sync

 

[shaun]

Straight out of the box they will be way too fast for a begginer, add afew drops of red rocket fuel aswell as your brake blocks in till you get use to it. The end spool knob should be adjusted so theres just the very slightest wiggle in the spool, left to right. Under fill the reel, say 3/4 full if your still having problems, also try using higher braking strain lines. You shouldn't need to feather the spool during the cast in my opinion unless the reel is running too fast or you have a bad casting technique.

 

[Davey-m]

Slosh 30

You need to just turn the spool tention up knob on the handle side backwards = less tension and forwards = more tension do this untill you have no nests.

What pound line do you have on it ?

 

[tilly]

When i first got my slosh 30 i had loads of problems with it i even emailed daiwa to ask if i could send it to them to have a look at it incase it was something the matter with it.i fannied around with it for a bit longer and discovered that the reel did not like the rod it was on.tried it with another rod and it has been perfectly fine ever since but not with the original rod it was going to be used with!!.Im sure there was a post last year about the same problem and the lad tried it with another rod and it seemed to do the trick for him as well!!

 

[tonyfromalnwick]

Have you put the brake blocks in ?
They aren't fitted when the reel leaves the factory.

 

[E2egance]

I'm in the same boat with my sl20sh. Same problems so I've put mine on ebay. I have bought a okuma magnetix 20 and it is obviously modelled on the slosh but with the addition of mag breaks. You could get a straight swap online. It's the first time I have strayed away from the big 3 daiwa, penn or abu but glad I did. I have never cast as far or with such ease. I'm going to get the larger okuma magnetix 30 model next month.

 

[lee_wood]

I'm in the same boat with my sl20sh. Same problems so I've put mine on ebay. I have bought a okuma magnetix 20 and it is obviously modelled on the slosh but with the addition of mag breaks. You could get a straight swap online. It's the first time I have strayed away from the big 3 daiwa, penn or abu but glad I did. I have never cast as far or with such ease. I'm going to get the larger okuma magnetix 30 model next month.

I have the same real m8 they are a great i think. people slate them al because of the name

 

[wheres the fish?]

I got this for xmas, Had 6 cast of it since then that all resulted in huge birds nests. Seems like the line is stopping in mid air every time. Ive put the brakes in (2 red ones). Any advice where im going wrong? it isnt over lined and never had this problem with my last reel. Only diffrerence is the slosh hasnt got a level wind, Am thinking it may be the way im putting line on new spool? But either way its driving me mad!!

Tony As my teachers used to tell me all the time... The answer is in the question

 

[E2egance]

I remember getting one of the okuma 'cheap' fixed spool reel years ago when they first came out. All the mags at the time gave them great reviews. They were not like most of the crappy new brands that came out. I have used okuma fixed spool reels for carp when i replaced my shimano baitrunners. I was always wary of gettting a multiplier as until recently you had to spend alot to get alot of reel. Thankfully this is no longer the case.

 

[g.ordon]

I got this for xmas, Had 6 cast of it since then that all resulted in huge birds nests. Seems like the line is stopping in mid air every time. Ive put the brakes in (2 red ones). Any advice where im going wrong? it isnt over lined and never had this problem with my last reel. Only diffrerence is the slosh hasnt got a level wind, Am thinking it may be the way im putting line on new spool? But either way its driving me mad!!

Don't think it's got anything to do with brake blocks mate from how you describe the problem, I would tighten the spool tension a bit until it slows the reel down then gradually slacken it off to the point just before yer getting to much line lift. The adjustment will be very fine, just a touch at a time. Also, as said, alot depends on casting technique.

 

[david.northeast]

Ill give you £30 for it if ya cant sort it

 

[tonyfromalnwick]

Tony As my teachers used to tell me all the time... The answer is in the question

I'm getting old and decrepit you know.

 

[kittyyak]

Ill give you £30 for it if ya cant sort it

£35

 

[endurothumpers]

what line are you using ? i tried that sakuma nite crystal kept doing the same thing cast it and seemed to stop mid air and nest.changed the line for ultima 18lb f1 never had anymore trouble.

 

[canman]

Another contributing factor could be if you are casting into the wind. Untill you get used to the reel, tighten up the spool tensioning knob on the side of the reel till your sinker won't drop down with the spool out of gear, slowly turn the knob untill the sinker drops at a controld speed, and that should sort the problem out as long as you are casting smooth enough.

 

[david.northeast]

Another contributing factor could be if you are casting into the wind. Untill you get used to the reel, tighten up the spool tensioning knob on the side of the reel till your sinker won't drop down with the spool out of gear, slowly turn the knob untill the sinker drops at a controld speed, and that should sort the problem out as long as you are casting smooth enough.

Thats how i first learned arthur