Spigot care
- Thread starter Nooo Fish
- Start date
It's a hard one to answer mate as you can only really help prevent to spigot from wearing I.e was them down remove sand and so on, this time of year carbon can act it's self by swelling in the heat, you could rub the spigot down a tiny bit but wouldn't recommend it this time of year. Come winter they could contract a little and cause it to be loose lol.
endurothumpers
Well-known member
As Karl says but get yourself a bottle brush and make sure you clean the butt section as well bit soapy water and bottle brush keep everything nice and clean and lubricate with the ptfe spray.
Nooo Fish
Well-known member
That's all I wanted to know about mate. No way am I going to rub a brand new spigot down. I'll get some ptfe spray in before I get it back. Wait till our lass catches me with the bairns bottle brush. Lol.
Thanks a lot lads. I need to look after this rod cos I'd be gutted if it ended up knackered. They are getting hard to come by now.
onefortheroad
Well-known member
I apply a lashing of gentlemans hockle to mine on assembly , its free and comes in many colours . 
Stewart 1971
Well-known member
^this^
It's what Century themselves recommend. Over time the spigot dries out and becomes stiff and if left will get stuck. Give it a spray with the PTFE (think I paid about £2 for a massive can of the 3in1 stuff - will last forever), leave it a bit then wipe off the excess and the spigot should be good as new.
Repeat as soon as it starts to get a bit stiff - I have to do my TTLD about three times a year.
Stewart 1971
Well-known member
When I had a Mk1 TT Sport my first session was down at Selsey East beach in Sussex after Bream. Rod went together fine and was a joy to use but at the end of the session I couldn't get it apart for love nor money.
Ended up driving the 25 odd miles back home to Portsmouth with the passenger side window down and the rod tip sticking out the front like some mediaeval knight on the jousting court. Just as well it was a mild spring night or I'd have ended up very wet and cold.
Was a right bugger to get apart - took me about four or five days working on it every day until it separated. Since then I've used the PTFE spray on all my spigots and never had a problem since
hound hunter
Well-known member
Look in your local £ shop,ptfe spray made by rapide products
hound hunter
Well-known member
Yer welcome m8,good gear for a £,also use rapide silicone spray to clean my rod,bit like furniture polish,gives it an element of protection,works a treat
n it's only a quid
Yer welcome m8,good gear for a £,also use rapide silicone spray to clean my rod,bit like furniture polish,gives it an element of protection,works a treat
And you have the cheek to call me a tackle tart.
endurothumpers
Well-known member
I wouldn't recommend you put silicone spray on your rods to shine them up as its a nightmare if you ever need it rebuilt or even get guides replaced if they break.
hound hunter
Well-known member
That's good advice fellah,never thought of that:red:norm use furniture polish or I like carpride from £ shop (spray wax)prob silicone based:red:cheers for the tip
Stewart 1971
Well-known member
That's good advice fellah,never thought of that:red:norm use furniture polish or I like carpride from £ shop (spray wax)prob silicone based:red:cheers for the tip
I just hoy mine in the corner until I'm out next, if I'm feeling energetic I might take the reels off...
hound hunter
Well-known member
Sounds like ourkid stuthrows his multi's in his sand ridden box for weeks on end
Rotten rigs/wallet u name it lol,all I get from him is why buy it when I can nick it off you
throws his multi's in his sand ridden box for weeks on endRotten rigs/wallet u name it lol,all I get from him is why buy it when I can nick it off you
Same as me then once a year take them apart clean and oil, if I have been in the beach they might get a soak in the sink
