TLD Drag

[The Great Wallsendo]

Took my reel apart yesterday to give a clean as it's starting to sound a bit grindy when reeeling in...

anyway...put it back together and I'm having trouble getting the drag to tighten up correctly

any ideas anyone?

I know the drag mechanism is inside the spool (I didn't touch that) is it a case of tightening the drag up a little manually then reassembling??

Cheers in advance

 

[KeithB]

Put the lever back in the "free spool" then hold it there till you tighten the drag nut.

If it's grinding it's probs the bearing in the side plate, just changed Kyle's for him.

It's a 7x17x5 bearing £10.36 delivered from - Simply Bearings Ltd

There's probably cheaper places.

 

[The Great Wallsendo]

Cheers Keith - will try that tonight

I was having trouble with that tiny little spring and clicker on the anti-reverse as well before I realised you can put the side plate back together with the handle in situ :red:

Bearing sounds likely...I thought perhaps it was verdigre'd gearings at first but they were spotless

 

[KeithB]

Yeah, refit the handle to hold the anti reverse in place before you refit the side plate.

 

[The Great Wallsendo]

sorted :thumbup:...nearly had a moment or two tho when I thought I was going to be giving you a ring