Whats the best Hi Build

[jonesey]

Im looking to sort out a few rods with new rings and im looking for a decent hi build and threads. Can any of you rodbuilders please recommend some, ive been looking on the net but theres that many makes out there my heads spinning. Also any suppliers that are reasonably priced would be much appreciated.

 

[jordy]

I`ve tried a few high build,currently back on flexcoat high build..threadmaster was good to use too but i prefer flexcoat.Try rod rings and things for your thread,very helpful lad there.

 

[steve ifa]

Burj Khalifa

 

[fish fingers]

got to agree with jordy the only advantage with threadmaster if you are slightly out with your mix which should be 50/50 the above can be a lttle bit better but flexcoat has to be 50/50 or you may get a soft tacky finish which can be rectified easily but just more work use syringes to measure your part a & b for best results had some free samples from yankee land bullard international cracking stuff aswell happy building

 

[codseeker]

flexicoat it iz i heard

 

[jonesey]

Thanks for the replies, i'll order some of each and have a go. Looks a decent site for the threads as well.

 

[jonesey]

Thanks for the replies, i'll order some of each and have a go. Looks a decent site for the threads as well.

 

[ShArK12]

Flex-coat is also good for hard coating my own made wood plugs

,

sorry for hijacking the thread but as i say flex-coat all the way

 

[seabeast]

high build

high build

only ever used threadmaster myself,but flexi coat looks the buisness as well ,like jordy says rods rings and things will help you theyre good.

 

[bandit]

Gibbs Rod Wrap