penn fathom 15 mag

[BIG HITTER 1]

just fitted a mono mag to my fathom 15 tried to mount it through the ratchet hole but the mag was right on the rim of the spool so had to drill through side plate and grind some of the metal work away was a bit of pain but the finished job works just great the reel now is so much easier to set up from full stopping power to totally free spool well worth the effort

 

[cod magnet]

i got one mono magged makes a good reel a briliant reel , to slow with 2 blocks to fast with one block , mag transforms it brill

 

[topcodder1]

Crackin lookin reel there cheers James

 

[lionfish]

hello,
So what did you do with the centrifugal brake assembly that was attached to the spool? Can we see some pictures of that side with the spool and mag? You did such a smart job on that install, I'm looking to do the same to my reel, and I'd like to know as much as I can before drilling/grinding away.

 

[big phil 123]

hello,
So what did you do with the centrifugal brake assembly that was attached to the spool? Can we see some pictures of that side with the spool and mag? You did such a smart job on that install, I'm looking to do the same to my reel, and I'd like to know as much as I can before drilling/grinding away.

Just take the brakes out the cog the lot just so it's spool spinadal or else it will run slow

 

[BIG HITTER 1]

1

 

[lionfish]

Thanks for the welcome and for the ever helpful bunch of views. Those views clear things up greatly for me.
Were you not at all worried about the bearing walking out of the spool with the brake gone?
Cheers
K.

 

[BIG HITTER 1]

No worries about the bearing coming out mate the brass bullet in the side plate keeps the bearing inplace

 

[stephie1]

i got one mono magged makes a good reel a briliant reel , to slow with 2 blocks to fast with one block , mag transforms it brill

thought you where a comfirmed daiwa blue washing m/c man cod magnet, good to see you appreciate the casting abilities of penn reels :red:

 

[beachbuddy]

thought you where a comfirmed daiwa blue washing m/c man cod magnet, good to see you appreciate the casting abilities of penn reels :red:

Get ya self a affinity 8000 50lb braid 80lb braid leader stephie

 

[stephie1]

Santa is bringing me one so i can be the "king of the swingers" on t'prom

 

[cod magnet]

santa is bringing me one so i can be the "king of the swingers" on t'prom

a gay swinger at that ya dirty divel

 

[stephie1]

a gay swinger at that ya dirty divel

Oooooooooff that's a bit strang marra..... just coz az FIFTY yards past ya wiff a big bait on cod magneto man

 

[BillQuay]

Which mono mag did you use and where did you get it from.
I have also been told you can improve the Fathom 15 casting further by replacing ratchet side spindle sleeve with a bearing.

 

[stephie1]

I've got one of the macey conversions that keeps the ratchet.it seems to cast very well.as for the
Sleeve the spool runs on bearings like a 6500 and the left hand locator is just a positional centralised. The spindle doesn't rotate during the cast or not enough to effect anything. Clean bearings and set up mag and the really fly.

 

[dale19]

penn fathom

penn fathom

Which mono mag did you use and where did you get it from.
I have also been told you can improve the Fathom 15 casting further by replacing ratchet side spindle sleeve with a bearing.

all you need to do is remove all the blue grease take out the spool bearings clean them in lighter fuel the dry apply 1 drop of rocket fuel to each bearing replace . check to see how many brakes are out there are a total of 6 click 4 back leaving 2 that will control the spool. run the spool should make a lot of difference.