reel help/advice

kela66

kela66

Well-known member
i bought a new rod recently and the site it came from was offering to combo it with a penn roddy for an extra 25 quid ,im sure you all have seen the adverts in the mags , having never had a multiplier before i thought it was a cheap way of trying one out , my problem is the leaflet that comes with it says before fishing you should adjust the cast control by tightening the cast control knob t up clockwise fitting it to the rod and attaching the weight to be used letting 8" of line out then backing the cast control knob off anticlockwise till the weight starts to drop . done that nowt happens attached are pics of the knob screwed on and fully off still nowt happens ,any ideas ???? , i realize this is a cr*p reel now and have already promised myself no more "cheap bargins" cheers davey
 

Attachments

  • sl1200 023.jpg
    sl1200 023.jpg
    66.7 KB · Views: 0
  • sl1200 024.jpg
    sl1200 024.jpg
    65.9 KB · Views: 0
has it got one of those knobs on the other side if so try that one. if not has it got all the brake blocks in.
 
Last edited:
???
Never used one of these Penn reels before but if you've got the reel in free spool and the end caps are loosened or as you've done, taken them right off, then there may be a problem with the reel as it should be giving you line. Best off let some one who's used a multi before have a little go with it, might just be something simple that you just might not be aware of nt having used a multi before. If they identify a problem get it back to the shop you got it from.
 
Last edited:
good idea mick , fish on me own though so don't no anyone who can have a look soon .i will give it a go though as i only bought it to go with a flatty rod so i'm not trying for mega long cast's any way .might have to join the rspb soon due to the amount of birds nests i may have :)
 
Daft question, but you are pushing the release forward aren't you? Big grey plastic plate below where your thumb goes to control the spool? Just push it up and forward to release the spool into free run...

Got a Penn Roddy myself, they're nowt much but canny enough for the harbours if you're not wanting a long cast.
 
I was about to say that, I bought one. gave it away. It tended to engage during the cast.

My opinion,? Utter waste of money. I think I paid £12 and felt robbed.
 
yea done all that ,im thinking the same as you lads its crap. buy cheap pay dearly ,you only get what you pay for etc etc :)
 
Back
Top