Roads

The Great Wallsendo

The Great Wallsendo

Well-known member
Anyone out there in the "know" know what's going on with our regions road surfaces?

Most of North Tynesides roads are like a lunar landscape and if you're fortunate enough to live in Wallsend then you have the added pleasure of speed bumps as well as huge pot holes everywhere - can feel a stern letter to the new incumbant Mayor coming on methinks

Too busy with their expenses to worry about local issues perhaps?
 
Gateshead fine of late, loads of work being done, just fall in one of them and put a claim in like this woman did in my local shoppng area, she got 3k for it.

The cash Would fund your lead and trace making production line for you :)
 
on the note of Leads Tone, I`ve just converted (due to bad weather an no fishing) £30 worth of scrap lead into 12oz weights ........... finished up with EXACTLY :) 100 , may have had a bit overrun lead from last time still in the pan so safe to say 96 leads to the £30 ...... bit gas, £2.50 worth of wires and a lot of effort ... but certainly worth the while at an all up cost of about 40p per weight .. As Keith mentioned previously its just good to do anyway .... :) :) at least that should cover me for the next say .......... 3 or 4 trips :) :)
 
Nice one Norman, so doing rough calcs, sounds like lead is still about a quid per kilo :(

It was 33p per kilo when I first started making sinkers about 4 years ago.
 
Aye Keith, I buy it in £30 lumps/bags ... never know or take much interest in the weight cos you just get what you get ... but one things for sure It used to take two or sometimes 3 bags to carry £30 worth , now it`s only one bag and I can lift it myself ! :(

whats next, nuts and bolts and old spark plugs ? :) :) :)


mind you as you pointed out in a post somewhere theres nothing like looking into a bucket of 100+ weights you`ve just cast yourself ......... magic :)
 
Like these you mean :D

sinkers.jpg
 
I love making leads, its sad but i do.

Always get my lead from a local scrappy as he a fisherman and sorts out all the clean new flashing for me.

Took me 7hrs to make 160 10oz leads last time, its slow on my burner but cost about £2 in fuel.
 
yup keith, just like that lol :) :)

I use two moulds and a workbench to clamp them (one each end then pour two together and repeat ..... :) :)
 
I ment to drop that pot off, will this week if am down.

Prob be down Thur if nothing more than to remove the 100s of shells off the boat roof :)

See if you can set fire to the bench like i did after i left a red hot mould on the wooden bit for about 5 mins :)

I have that same mould Keith 8oz-10oz and 12oz..only use the 10oz our days as never lose many 8oz leads as only use them for rough ground or lead heads
 
Roads - when I mot'd my Zafira this year it needed both rear coil springs replacing and a full front arm with ball joint and bushes. Bloody potholes everywhere lately :(
 

Similar threads

C
MCZ meeting Birmingham
Replies
4
Views
1K
sage
S
Back
Top