turbo bearings

[g.ordon]

Hi,
Can anyone tell me what size spool bearings for this reel. Talked to daiwa today and they want £6 odd for the l/h side one and you've got to buy the whole spool assembly for the gearbox side one which is £30 odd. Just asking incase anyone already knows which will save me having to measure them.
Lazy bas**rd ehh

 

[Davey-m]

Spool bearings in mm left 4x11x4 and right 5x11x4

 

[g.ordon]

Spool bearings in mm left 4x11x4 and right 5x11x4

Excellent info, just what I needed. Cheers Davey

 

[waco]

excellent info, just what i needed. Cheers davey

gordon have you tried the bearing place at bill quay they reckon they can do any bearing if you take the old ones in

 

[rockling]

seen some on ebay sets for round 15 quid not always on but if keep checking they pop up must when in stock

 

[jack555]

DAIWA 7HT (1 @ 4x11x4 & 1 @ 6x13x5)
DAIWA 7HT TURBO (1 @ 4x11x4 & 1@ 5x11x4)

 

[marco1967]

abec 7 ones here --- £ 9.10 the pair . Daiwa Millionaire 7HT Turbo Replacement Bearings Formula Upgrade abec 7 | eBay

 

[g.ordon]

abec 7 ones here --- £ 9.10 the pair . Daiwa Millionaire 7HT Turbo Replacement Bearings Formula Upgrade abec 7 | eBay

Thanks for all the replies lads.

I've just ordered these like, can't grumble at the price.

Cheers again all.

 

[marco1967]

abec 3 - £5.45

Daiwa Millionaire 7HT Turbo Replacement Bearings Formula abec 3 | eBay

 

[Mr.Plumber]

The bearings in the reels are standard bearings. They can be had for less than £1.00 each from various sites off the net. Ie. the 4x11x4 is a very common bearing used extesivly in the radio model circuit. They cost about 90p each and are commonly sized up as 694zz.

 

[Debaitable]

The bearings in the reels are standard bearings. They can be had for less than £1.00 each from various sites off the net. Ie. the 4x11x4 is a very common bearing used extesivly in the radio model circuit. They cost about 90p each and are commonly sized up as 694zz.

Agree, I've got bearings from a model shop before. I also get my c-clips for the 7ht handles there too, £1.30 for 10

 

[g.ordon]

yer agree, you could get standard bearings in these sizes for a couple of quid. As well as model shops you can get them from any bearing supplier like bob says bill quay is one of them. Just thought I'd try marco's suggestion and give the abec 7's a shot

 

[g.ordon]

abec 7 ones here --- £ 9.10 the pair . Daiwa Millionaire 7HT Turbo Replacement Bearings Formula Upgrade abec 7 | eBay

Canny service this like, ordered them yesterday lunch time and they were delivered today-

Now fitted, only takes 10 minutes. Cheers again marco

 

[marco1967]

No bother. I have ordered from Charlie before canny fella.