Abu Diagrams

[LING_BASHER]

Does anyone know a website that has reel diagrams on?I am after 1 for a ABU 7500 LD as mine is f***ed after 10 months of use (less than 8 fishing trips) not impressed at all.


Cheers Richy

 

[Marc]

Richy, Used my 7500LD about 4 times last year, then the worm and the spiraly?? bit buggered up. Billy got me a new set for a couple of quid but you still don\'t expect it from a reel made by ABU. I\'ve got a couple of the old 7000 and have no problem with them. Do you think they are using cheaper parts now to keep the costs down.

 

[LING_BASHER]

Well i stripped it down on monday and was not impressed with the gutts of the reel, looked, well to be fair c**p everyone seems to be using more and more nylon. On my reel all the threads holding the handle on have stripped.took it out my boat boat sunday night and the handle dropped off....less than happy i can tell you, someone said it\'s about £8 for a new bit and the p+p on top of that .

 

[sless]

richy
your better off buying a second hand old reel
the abu 7200 are sh ite the pinion gear snapped on andy winters
my mates
slosh 30 pinion gear snapped on monday nite
mentioned it to the lad in the tackle shop
reply
shouldnt buy cheap reels
if it was mine he would have been wearing the foooka

 

[LING_BASHER]

cheap reels!!!!! my reply would have been yer i wont bye them from you again anyway.

 

[BriH]

richy where did you buy it from - can you not take it back and get them to fix it for you. ???

 

[Ant]

I\'m sure they\'re plenty of people using 7200\'s without any hassle Sless, my old man uses 2 for a start!

Sloshes snap gearshafts for fun, yet knowbody slags them off! :casstet:

 

[sless]

i have seen a few people bringing 7200 s back to the shop
getting replacements and a week later bringing them back
the same problem
sloshes are shite(the new ones)cheap as chips
like owt these days
made abroad
im not even going there with the rods
hahaha
work that one out for your selves

 

[sless]

your dad got a canny ling off roker on monday
you have to be a good angler to get a ling off roker
hahaha
he had a good whiting aswell
dont know wot reel he used tho

 

[willywetegg]

I have fished for a long enough time now. I use both Abu and Penn reels. I now know enough to stick with Penn and never Buy another Abu reel. Just my opinion for what its worth but to me there is nothing to compare the two. As far as I am concerned Abu are overpriced and over hyped.

 

[BILLYB]

I have sold abu 7200 and all have come back for the pinion,But abu have a new pinion for it that solved the problem. SLosh 30 shafts only snapped when they are not used for the job they are made for{catching fish] most anglers fish places like the groin/s.s pier and try to pull in about 2 ton of rock,the reel is made to catch fish and not to be a mobile crane.I have hed my slosh reels for years and have not had a problem

 

[Gwyn]

I have the diagram for the 7000C4LD if that is any help let me know and I will email it to you

Gwyn

 

[LING_BASHER]

I that would be great, can you email me it on [email protected]

 

[robfow]

If the diagram in the last reply is of no use to you I have 2 of the diagrams for the 7500 if you require one let me know and I\'ll email it to you. robfow.

 

[peter.m]

E-mail The Reel Doctor from the tsf site, he seems to know about these problems and usually has a solution for most problems.

I agree with Billy about the SLOSH. I love mine both the 20 and the 30 however the 30 bust when it fell out of the airing cupboard so will be on the look out for a new one (or 2 if I can get away with it).