reel repairs

[david.northeast]

Can anyone help me
I've just bought a diawa slosh 30 2nd hand and took it to work for a bit of a clean up and when I've put it back together it just doesn't want to work the same again

* the handle is reeling backwards
* the spool is rubbing making it tight when turning
* clicker won't work but the ratchet will

It may just be something simple but I can't fathem it out
Does anyone know of any tackle shops that will repair the reel to make it work correctly again

David

 

[codcatcher3000]

havent got a clue but did overhear someone say a common mistake is to place teh reverse bearing wrong way round.....take it to a tackle shop they might be able to point u in the right direction staright away

 

[shaun]

Sounds like it can be easily fixed just a bit of a mess on if you don’t know what you’re doing, first of all I would check the pinion gear is in place and hasn’t popped out, if its reeling backwards as well I think that will be because you have put the pinion gear back wrong. there’s a few good guides on WSF with pics which will help you.

 

[lingking]

take it to ron at id,xpect a rolliking,but he will fix it

 

[flux]

schematics are available on Planetseafishing.com if that helps

 

[Parky]

Here is a step by step guide but its an upgrade guide but basically the reel goes back together the same way very hand : )

DAIWA SL20SH UPGRADE OPTIONS AND INSTRUCTIONS.

 

[david.northeast]

Gettin the bottom drive plate off is the problem It doesn't just lift off
It was workin spot on when a got it it does still work though just not as good as before I took it apart

 

[metalpunk]

Here is a step by step guide but its an upgrade guide but basically the reel goes back together the same way very hand : )

DAIWA SL20SH UPGRADE OPTIONS AND INSTRUCTIONS.

Thanx for that link Parky....good advice and pics.

 

[waco]

take it to ron at id,xpect a rolliking,but he will fix it

a'll second that , take it to ronnie I D fishing

 

[big g]

thanks mate that has helped me as well reel is sorted thought i would end up taking it to a shop many thanks

 

[david.northeast]

Aye cheers parky but how do you get that big cog off

 

[big g]

just wiggle the cog it do,s come of just be patient i had give up on mine till i went on that link of parky

 

[david.northeast]

I've left it at work I have no patience if it didn't come out after 3 hours of messing with it so gna see if the gaffer can sort summit out

 

[shaun]

Aye cheers parky but how do you get that big cog off

I don't think it comes off, i couldnt get it off mine but you can just work around it.

 

[david.northeast]

I don't think it comes off, i couldnt get it off mine but you can just work around it.

That's what a think the problem is when I took the case off the shaft and the wheel wobbles couldn't find a seat for it to drop recess for it to sit in so put it back together and when you get the bearings back in it stops
WIERD

 

[Parky]

Here is a step by step guide for the sl30hsv can not find a guide for the SL30 but this is very similar that big cog does come off mine did but it was that long ago that i done it as i use a penn 525mag now hope you get it sorted : )

http://www.pierandsurf.com/fishing-forum/showthread.php?47973-daiwa-sealine-x-30shv-rebuild

 

[david.northeast]

Cheers everyone reel sorted now