Rod building decals

[ANDY.WILKY]

Just wondered if anyone knows of a site where you can order rod decals as i have a zziplex m427 blank with the rings taped on but the zziplex sticker is looking a bit tatty cheers.

 

[endurothumpers]

Just wondered if anyone knows of a site where you can order rod decals as i have a zziplex m427 blank with the rings taped on but the zziplex sticker is looking a bit tatty cheers.

Have you tried contacting zziplex directly they are probably the only ones that will have them only other way might be one of these decal shops that make up motorcycle decals.

 

[ANDY.WILKY]

have had trouble contacting zziplex in the past but might just give the motorbike shops a go, might get a custom one knocked up

 

[endurothumpers]

have had trouble contacting zziplex in the past but might just give the motorbike shops a go, might get a custom one knocked up

I know what you mean some companies unless your buying a rod or something worth there while they don't even have the manners to reply.

 

[jordy]

You`ll have trouble getting the decals off zziplex,spoke to them a few times about getting some,i gave up in the end.

 

[Macka]

You`ll have trouble getting the decals off zziplex,spoke to them a few times about getting some,i gave up in the end.

Sure i seen a few people on ebay offering to do any kind of sticker as long as you supply the design, might be worth a quick search.

 

[chipper2]

You`ll have trouble getting the decals off zziplex,spoke to them a few times about getting some,i gave up in the end.

arn,t they all freezed on now,i know centurys are,as someone said,if you can show the right size and a pic,then go to a vinyl sign writing shop,not sure how much?to make the century logo,would have been £30 so ive left the old original ones on.

 

[ANDY.WILKY]

Cheers for the replys, there must be someone out there that does them as i have had many rods built and rebuilt over the years and they have come back with new decals, zziplex century and conoflex.

 

[kingcod deano]

you could try sending them an email asking for decals to premote there product thats what i did and got alot of good response

 

[chipper2]

you could try sending them an email asking for decals to premote there product thats what i did and got alot of good response

I think i,ll try again,if i remember they sent me the logo,but the size what goes on the slammer

 

[kensr27sz]

see dave borwell or gary ramsden they might know how to get hold of them or even have some . at least worth a try .

 

[ANDY.WILKY]

Will do cheers kenny.