18 gauge.,wire.

[regpude]

got a chance of buying some of the above.just wondering is it any good for grip leads.ie to thick or thin ?..think its 6mm,ive usually bought.oops sorry 1.6mm wires.

 

[fishy]

reg that is only about 1 mm thick

i think 18 gauge we use it to check our thread sizes that we have turned on a lathe with a 1mm pitch

 

[regpude]

wires.

wires.

reg that is only about 1 mm thick

i think 18 gauge we use it to check our thread sizes that we have turned on a lathe with a 1mm pitch

.thankyou for reply fishy.eod fishy all im after is some wires for g/leads.as mentioned can buy some 18 gauge{WHAT EVER THEY ARE}.im a foot @inches bloke,lol.so ill refrace post.any body got any welding rod suitable for g/leads for sale.thanks again for reply,atb for 2017 tight lines..

 

[GEORDIE H]

got a chance of buying some of the above.just wondering is it any good for grip leads.ie to thick or thin ?..think its 6mm,ive usually bought.

Hi Reg 18 gauge is 1mm standard shop grip wire
most stainless steal mig wire is 1.6mm which I use
for the baitclip tops and also for super strong grips.

 

[regpude]

GREAT START TO 2017.for me.

GREAT START TO 2017.for me.

Hi Reg 18 gauge is 1mm standard shop grip wire
most stainless steal mig wire is 1.6mm which I use
for the baitclip tops and also for super strong grips.

.all makes sense now GEORDIE H.LOL.you probaly know ive made leads for years,just took my contact supplier for granted,sadly no more.eod ill buy of the 18gauge wires {standard} for the 3oz leads i make.thankyou for taking time to reply.CHEERS AGAIN fishy,got there in the end.:thumbup:

 

[Davey1970]

you'll probably need to speak to a welder then reg eh, 3oz lead's....!....

 

[regpude]

3oz leads.

3oz leads.

you'll probably need to speak to a welder then reg eh, 3oz lead's....!....

.i davey 3oz leads.the holes in that mould are slightly smaller than the rest of my g/l moulds.i use the 3s in the river with lighter rod.but i also sell alot of them to POLES,as in english.lol..ps,lookslike your back at work already.can you raid the stores,ill gladly buy a tube full off you.could meet up say blyth docks entrance..

 

[Davey1970]

am not risking me job for a couple of quid reg, but al have a word with me gaffa.

 

[regpude]

am not risking me job for a couple of quid reg, but al have a word with me gaffa.

.understand davey.{couple of quid} thats abit steep mind.LOL.:.

 

[ecoli]

reg give Fat cod a pm I used to work with him and he is a welder and may be able to help you out (he is red n white )

 

[Davey1970]

a'v helped keithb with welding rod's before and he's red and white.....!......

 

[lingking]

a'v helped keithb with welding rod's before and he's red and white.....!......

when it comes to fishing we have to be colour blind,Davey

 

[ecoli]

when it comes to fishing we have to be colour blind,Davey

I fish with two red n whites and have some great banter especially the lad I fly fish with it makes it a fun day out

 

[Davey1970]

al help anyone if a can, but reg am a tig welder so 1.6, 2.4, 3.2 would suite me. anyway black and white/red and white/blue and white.
make's no diference to me lad's.

 

[regpude]

1.6.

1.6.

al help anyone if a can, but reg am a tig welder so 1.6, 2.4, 3.2 would suite me. anyway black and white/red and white/blue and white.
make's no diference to me lad's.

.thats what im after.just let me know if you can get any.ill take a £s,worth,lol..

 

[regpude]

cheers.

cheers.

reg give Fat cod a pm I used to work with him and he is a welder and may be able to help you out (he is red n white )

.ill give Fat cod a pm.but ill still if possible buy some of davey aswell.

 

[Davey1970]

al see what a can do reg m8, and if they don't cost me nowt al not be charging you..!..

 

[Davey1970]

reg, av tried sending you 3 pm's, either your inbox is full or you've barred me...!...

 

[davidhayley1945]

reg, av tried sending you 3 pm's, either your inbox is full or you've barred me...!...

haha,had to laugh davy,come on reg were you hiding,or you finishing the xmas booze off. davy.

 

[Davey1970]

that's the end of that then.
you try and help people.....!